Knowledgebase

Search by one ore more criteria:
48V charger not functioning - 1 L.E.D
This Article is for the Kuberg Freerider, Freerider street, Challenger and X-Force. Make sure that you are following the correct charging procedure, you can find a copy of this in the manual that came with your bike, or you can download a digital copy at https://www.kuberg.com/en/owners-manual ...
Magnetic kill switch - bike never turns off
This article is for the Kuberg Cross, Cross Hero, Trial, Trial Hero & Start Symptoms.‍ • The bike is always on and fully functional, regardless of if the kill switch is on its base or not. When the mag switch is engaged, the circuit is broken and the bike can turn on, this is why when th...
48V controller failure (Pre-2019 models)
This article is for the Kuberg Freerider, Freerider street, X-force & Challenger.S‍ymptoms.• There is no movement from the bike• There is not the regular sound "ping" from the motor• There is no light on the L.E.DIn some cases, the rear wheel will lock and will not move without great effort.First, ...
Hero battery connection order
All of the batteries are installed in the bike with the connection tabs towards the front of the bike. Two on the top, one in the bottom space. 1. From the controller you’ll see a red cable connect to a fuse, from the fuse you’ll see a red cable that connects to the positive of the top rear batt...
Young rider won't move when throttle engaged
This article is for the Kuberg Start, Trial, Trial Hero, Cross & Cross Hero. Make sure that you are following the correct charging procedure, you can find a copy of this in the manual that came with your bike, or you can download a digital copy at https://www.kuberg.com/en/owners-manual S‍y...
Constant flashing lights on throttle
This article is for the Kuberg Cross, Cross Hero, Trial, Trial Hero and Start. ‍Symptoms When the magnetic kill switch is attached, the lights on the throttle constantly flash and will not stop. The bike does not run This is caused by a damaged or stuck mode select button. Testing Y...
Hall sensor 48V (Pre-2019 models)
This article is for the Kuberg Freerider, Freerider street, Challenger &  X-Force.SymptomsThe bike turns on and makes the "Ping" sound to indicate that the bike is on.When the throttle is engaged the drivetrain twitches back and forth or makes stop-start movements.  (In some situations when the thr...
lights stay on throttle
This article is for the Kuberg Trial, Cross, Start, Trial Hero & Cross Hero.‍Symptoms * The throttle is constantly showing the bottom two lights (Sometimes just one light), even when the magnetic kill switch is not engaged.* The bike will not runIf your throttle is constantly showing the bottom tw...
Only two lights on throttle after charging
This article is for the Kuberg Trial, Cross, Start, Trial Hero & Cross Hero. Make sure that you are following the correct charging procedure, you can find a copy of this in the manual that came with your bike, or you can download a digital copy at https://www.kuberg.com/en/owners-manual Sympt...
Mounting the front fender
When mounting the front fender to the Freerider, the Kuberg head badge will first need to be moved to make room underneath for the new fender. 1. Remove the badge from the front of the Freerider 2‍. Remove the support bracket that the badge was attached too, there are two bolts on the underside...
Page: <<<<1234>>>>
Didn't you find what you were looking for? Create a support ticket.